Cart

DATSUN 280Z LOWER REAR RIGHT QUARTER REPAIR PANEL   MADE USING COLD ROLLED 18 GAUGE STEEL, THE BEST LOWER REAR RIGHT QUARTER REPAIR PANEL ON THE MARKET, THIS PANEL WILL ALSO WORK ON 260Z AND 240Z.

SKU:

KFD280Z-36

Brand:

Datsun

Tags:

DATSUN 240Z, KFD240Z-36

Weight:

1.5 kg

Dimensions:

60 × 33 × 9 cm

DATSUN 240Z COMPLETE FLOOR PANS THE ONLY DIE STAMPED 240Z FLOORS ON THE MARKET, ALL OTHERS BEING OFFERED ARE HAND MADE WITH INCONSISTENT QUALITY AND ACCURACY...

SHAPED CORRECTLY FOR THE TRANS TUNNEL, ALONG WITH THE FRONT AND BACK TOE BOARD UPRIGHTS THAT ARE ALSO NORMALLY BAD IF YOU ARE ALREADY IN THE POSITION OF NEEDING FLOOR REPLACEMENT.

DIE STAMPED COLD ROLL 18 GAUGE STEEL.

SKU:

KFD240Z-300

Brand:

Datsun

Tags:

240z, DATSUN, datsun 240z FLOORS, FLOOR PANS

Weight:

12 kg

Dimensions:

171 × 56 × 8 cm

240Z  SEAT MOUNTS DIE STAMPED IDENTICAL TO THE ORIGINAL

SKU:

KFD240Z-04

Brand:

Datsun

Weight:

5 kg

Dimensions:

40 × 20 × 5 cm

TOYOTA CELICA COUPE COMPLETE OUTER ROCKER LEFT SIDE  DIE STAMPED MADE USING COLD ROLLED 18 GAUGE STEEL, THE BEST INNER ROCKER ON THE MARKET.

SKU:

KFTOY-16

Brand:

Toyota

Weight:

7 kg

Dimensions:

30 × 20 × 50 cm

DATSUN 240Z LOWER 6 INCHES B PILLAR LEFT SIDE, COMPLETELY DIE STAMPED 18 GAUGED COLD ROLLED...

SKU:

KFD240Z-41

Brand:

Datsun

Tags:

DATSUN240Z, KFD240Z-40

Weight:

0.5 kg

Dimensions:

15 × 15 × 8 cm

TOYOTA CELICA FASTBACK ROCKER REINFORCEMENT LEFT SIDE, DIE STAMPED COLD ROLLED 18GAUGE STEEL NO ONE ELSE MAKES THIS PART, MOST PEOPLE DO NOT EVEN KNOW THAT THIS PART EXISTS.

SKU:

KFCF-18

Weight:

1 kg

Dimensions:

30 × 20 × 5 cm

DIE STAMPED COLD ROLLED 14 GAUGE METAL,  IDENTICAL IN DETAILS TO THE FACTORY ORIGINAL THE BEST AND ONLY REPRODUCTION SMILEY BUMPER ON THE MARKET.

LEAD TIME  APPROXIMATELY 2 WEEKS,

WITHOUT CHROME

SKU:

KFTOY-04WC

Tags:

ra29, toyota

Weight:

8 kg

Dimensions:

175 × 56 × 15 cm

BY PARTS:

Chrome, Without Chrome

REAR HATCH LOWER REPAIR SKIN SERIES 1

SKU:

KFD240Z-61

Weight:

4 kg

Dimensions:

45 × 46 × 9 cm

1ST GEN CELICA COUPE ROCKER ASSEMBLY LEFT SIDE, THESE ARE FULL DETAIL IDENTICAL TO THE ORIGINAL FACTORY PARTS. DIE STAMPED COLD ROLLED 18 GAUGE.

SKU:

KFTOY-100

Weight:

15 kg

Dimensions:

30 × 20 × 50 cm

DIE STAMPED COLD ROLLED 18 GAUGE, LOWER REAR OUTER FENDER,  IDENTICAL TO THE ORIGINAL.  THE BEST 510 LOWER REAR OUTER FENDER ON THE MARKET, SUPER HIGH QUALITY AT A VERY AFFORDABLE PRICE.

SKU:

KFD510-13

Brand:

Datsun

Tags:

DATSUN 510, LOWER REAR OUTER FENDER RIGHT LEFT DATSUN 510

Weight:

1.5 kg

Dimensions:

40 × 55 × 12 cm

CELICA LOWER FRONT FENDER REPAIR SECTIONS, THESE WILL WORK ON ALL 76 AND 77 CELICA COUPES AND FAST BACKS..DIE STAMPED COLD ROLLED 18 GAUGE STEEL.

SKU:

KFCF-19

Weight:

2 kg

Dimensions:

40 × 35 × 10 cm

DIE STAMPED COLD ROLLED 18 GAUGE, ALL CORRECT DETAILS,  THE ONLY CORRECT 510 OUTER ROCKER ON THE MARKET…

SKU:

KFD510-07

Brand:

Datsun

Tags:

DATSUN510, KFD510-07, ROCKER DATSUN

Weight:

3 kg

Dimensions:

152 × 16 × 10 cm

DIE STAMPED COLD ROLLED 14 GAUGE METAL,  IDENTICAL IN DETAILS TO THE FACTORY ORIGINAL THE BEST AND ONLY REPRODUCTION SMILEY BUMPER ON THE MARKET.

LEAD TIME  APPROXIMATEY 2 WEEKS,

WITHOUT CHROME

SKU:

KFTOY-05WC

Tags:

ra29, toyota

Weight:

8 kg

Dimensions:

175 × 56 × 15 cm

DIE STAMPED COLD ROLLED 14 GAUGE METAL,  IDENTICAL IN DETAILS TO THE FACTORY ORIGINAL THE BEST AND ONLY REPRODUCTION SMILEY BUMPER ON THE MARKET.  FIRST GEN CELICA TA20 TA22 RA20 RA22 FRONT BUMPER.

WITHOUT CHROME

SKU:

KFTOY-01WC

Tags:

Bumper, celica, front bumper, KFTOY-01, RA20, RA22, TA, TA20, toyota

Weight:

8 kg

Dimensions:

147 × 27 × 15 cm

DATSUN 240Z COMPLETE INNER ROCKER   MADE USING COLD ROLLED 18 GAUGE STEEL, FULLY DIE STAMPED, NOT HAND MADE… THE BEST COMPLETE INNER ROCKER ON THE MARKET.

SKU:

KFD240Z-10

Brand:

Datsun

Tags:

240z, DATSUN

Weight:

2 kg

Dimensions:

151 × 12 × 3 cm

DIE STAMPED COLD ROLLED 18 GAUGE, LOWER REAR INNER FENDER,  IDENTICAL TO THE ORIGINAL.  THE BEST 510 LOWER REAR INNER FENDER ON THE MARKET, SUPER HIGH QUALITY AT A VERY AFFORDABLE PRICE.

SKU:

KFD510-11

Brand:

Datsun

Tags:

DATSUN 510, LOWER REAR INNER FENDER DATSUN 510

Weight:

1.5 kg

Dimensions:

40 × 55 × 12 cm

TOYOTA CELICA FASTBACK ROCKER REINFORCEMENT RIGHT SIDE, DIE STAMPED COLD ROLLED 18GAUGE STEEL NO ONE ELSE MAKES THIS PART, MOST PEOPLE DO NOT EVEN KNOW THAT THIS PART EXISTS.

SKU:

KFCF-17

Weight:

1 kg

Dimensions:

30 × 20 × 5 cm

TOYOTA CELICA COUPE COMPLETE INNER ROCKER LEFT SIDE  DIE STAMPED MADE USING COLD ROLLED 18 GAUGE STEEL, THE BEST INNER ROCKER ON THE MARKET.

SKU:

KFTOY-14

Brand:

Toyota

Weight:

10 kg

Dimensions:

30 × 20 × 50 cm

REPLACEMENT REAR LEFT OUTER ROCKER REPAIR SECTION…DIE STAMPED COLD ROLLED 18 GAUGE STEEL

SKU:

KFD 240Z -08B

Brand:

Datsun

Weight:

1 kg

Dimensions:

42 × 15 × 8 cm

WITH STAMPING FOR LICENSE PLATE, WITHOUT STAMPING FOR LICENSE PLATE

SKU:

KFTOY-06

Brand:

Datsun

Tag:

TOYOTA RA 24

Weight:

3 kg

Dimensions:

119 × 27 × 6 cm

DIE STAMPED COLD ROLLED 14 GAUGE METAL,  IDENTICAL IN DETAILS TO THE FACTORY ORIGINAL THE BEST AND ONLY REPRODUCTION SMILEY BUMPER ON THE MARKET.  NO PLATE.

RAW METAL/ NOT CHROMED

SKU:

KFTOY-07WC

Tags:

Bumper, bumpercelica, celica, KFTOY-07, Toyota celica bumper

Weight:

8 kg

Dimensions:

175 × 56 × 15 cm

DATSUN 280Z COMPLETE OUTER ROCKER  DIE STAMPED MADE USING COLD ROLLED 18 GAUGE STEEL, THE BEST OUTER ROCKER ON THE MARKET, THIS ROCKER WILL ALSO WORK ON LATE 260Z

SKU:

KFD280Z-07

Brand:

Datsun

Weight:

10 kg

Dimensions:

30 × 20 × 50 cm

TOYOTA COROLLA SECOND GENERATION OUTER ROCKERS. THESE WILL WORK ON 2 DOOR, 4 DOOR, AND WAGONS. CARS FROM MAY 1970 TO APRIL 1974, AND KE26 WAGONS IN JAPAN UNTIL  MAY 1978.

SKU:

KFCO-06

Tag:

Toyota Corolla

Weight:

5 kg

Dimensions:

151 × 40 × 30 cm